7.6.15 Assembling the conveyor chain: AS 2/C-100, …-250, AS 2/R-300, …-700,
motor mounting (MA) = M 43
7.6.16 Assembling the conveyor chain: AS 2/C-400, …-700, …/R-1200, …-2200,
…/R-V-1200, …-2200, motor mounting (MA) = R/L 45
7.6.17 Assembling the conveyor chain: AS 2/C-400, …-700, …R-1200, …-2200,
…R-V-1200, …-2200, motor mounting (MA) = M 47
7.6.18 Modifying the mounting position of the motor-gear combination
or the gear motor 48
7.6.19 Scanning the chain length with sensor: AS 2/C-100, …-250,
AS 2/R-300, …-700 51
7.6.20 Scanning the chain length with sensor:
AS 2/R-1200, …-2200, AS 2/R-V-1200, …-2200 52
7.6.21 Electrical connection of the product 54
8 Commissioning 57
8.1 Initial commissioning 57
8.2 Residual risks 59
8.3 Re-commissioning after a standstill 61
9 Operation 61
9.1 Information on operation 61
9.1.1 Wear 61
9.1.2 Measures to reduce wear 61
9.1.3 Loading the workpiece pallet 62
9.1.4 Environmental factors 62
10 Maintenance and repair 63
10.1 Cleaning and care 64
10.2 Inspection 64
10.2.1 Conveyor chain (fl at top chain / accumulation roller chain) 64
10.3 Maintenance 64
10.3.1 Bearings 64
10.3.2 Gear 64
10.3.3 Motor 64
10.3.4 Conveyor chain (fl at top chain / accumulation roller chain) 65
10.3.5 Possibilities to lubricate the conveyor chain manually 66
10.3.6 LU 2 automatic lubrication unit 67
10.4 Replacing wear parts 68
10.4.1 Designations 68
10.4.2 Required tools 68
10.4.3 Required accessories 68
10.4.4 AS 2/C-100, …-250, AS 2/R-300, …-700: Disassembling
the protective case 69
10.4.5 Assembly instructions: Finding a chain lock with an operable chain 70
10.4.6 Assembly instructions: Fixing the chain tensioner at AS 2/C-100, …-250,
AS 2/R-300, …-700 71
10.4.7 Assembly instructions: Fixing the chain tensioner at AS 2/C-400, …-700,
AS 2/R-1200, …-2200, AS 2/R-V-1200, …-2200 71
10.4.8 Detecting the chain length at SE 2/C-100, …-250, SE 2/R-300, …-700 72
10.4.9 Detecting the chain length at SE 2/C-H, SE 2/R-H, SE 2/R-V 72
10.4.10 Shortening the conveyor chain: AS 2/C-100, …-250, AS 2/R-300, …-700,
motor mounting (MA) = R/L 73
10.4.11 Shortening the conveyor chain: AS 2/C-100, AS 2/R-300,
motor mounting (MA) = M 75
10.4.12 Shortening the conveyor chain: AS 2/C-400, …-700, AS 2/R-1200, …-2200,
AS 2/R-V-1200, …-2200, motor mounting (MA) = R/L 77
10.4.13 Assembly instructions: Changing chain and wear parts 79
10.4.14 Assembly instructions: Running direction of chain 81
10.4.15 Assembly instructions: Lubricating points 81
10.4.16 Changing the conveyor chain: AS 2/C-100, …-250, AS 2/R-300, …-700,
motor mounting (MA) = R/L 82
10.4.17 Changing the conveyor chain: AS 2/C-100, AS 2/R-300,
motor mounting (MA) = M 84
Contents 4/108
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08
To Next Page
Loading...
