Bosch rexroth SE 2/C Series - Page 53

Fig. 40:
SH 2/UV
358 736-109
X
2
)
1
1
2x
M
D
=2,5 Nm
T20
2
ISO 14585
ø4,2 x 25
2
)
1
)
0
W1452
ø5 x 25
ISO14583
M4 x 25
2x
2x
M
D
=1 Nm
T20
W1452
ø4 x 16
Scanning the chain length with sensor, "large" drive head (2/2)
1. Adjust the stop of the
sensor support.
2. Install the sensor
support with the
provided screws.
1
) Scope of delivery
2
) Not included in the scope of
delivery!
Please note:
Fully slide the sensor into
the sensor support.
Assembly 53/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH