Life stages of the machine according to EN 12100 Sect. 5.4 a /b (No. 1- 27), Sect. 5.4
a
1 Transport, assembly and installation
2 Commissioning
3 Use
4 Disassembly, decommissioning and disposal
5 Setting up
6 Verifying
7 Teaching/programming
8 Changeover
9 Startup
10 All operating modes
11 Feeding the machine
12 Removing product from the machine
13 Shutting the machine down
14 Shutting the machine down in the case of an emergency
15 Restoring operation after a bottleneck or blockage
16 Restarting after unscheduled shutdown
17 Troubleshooting and remedial action (intervention by operating personnel)
18 Cleaning and keeping clean
19 Preventive maintenance
20 Corrective maintenance
Operating states of the machine, Sect. 5.4 b
21
Normal operation
22 Modifi cation of a property or a dimension of the material or workpiece to be
processed
23 Failure of one (or more) of its components or supply devices
24 External disturbances (e.g. impact, vibration, electromagnetic interference)
25 Design faults or defects (e.g. software errors)
26 Disruption in the power supply
27 Ambient conditions (e.g. damaged fl oors)
58/108 Commissioning
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08
To Next Page
Loading...
