Bosch rexroth SE 2/C Series

To Next Page

To Previous Page

Table 7: Residual risks

60/108 Commissioning

Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08

Main Page

Table of Contents3
About this Documentation6
Validity of the Documentation6
Required and Supplementary Documentation7
Presentation of Information7
Safety Instructions7
Symbols8
Designations9
Abbreviations10
Safety Instructions10
About this Chapter10
Intended Use10
Improper Use10
Personnel Qualifi Cations11
General Safety Instructions11
Product-Specifi C Safety Instructions12
Personal Protective Equipment13
Owner Responsibilities13
General Notes on Property and Product Damage13
Scope of Delivery14
Condition on Delivery14
About this Product14
Specifi Cations14
Use of Drive Module as 214
Version of Drive Module as14
Product Description15
Differences between Previous and New Section Profi Le19
Identifi Cation of the Product22
Transport and Storage22
Transporting the Product22
Storing the Product22
Assembly23
Unpacking23
Installation Requirements23
Installation Position23
Required Tools23
Required Accessories24
Symbols Used25
Assembling the Product26
Assembling the Section ST 2/C, ST 2/R on Leg Sets26
Assembling the Section ST 2/C-H, ST 2/R-H, ST 2/R-V on Leg Sets27
Assembling the Curve KU 2/O-90, KU 2/O-180 on Leg Sets30
Assembling the Drive Module31
R-V-120033
Assembling the Return Unit um 234
Assembling the Cross Connector and Foundation Bracket35
Assembling the Conveyor Units Drive Head-To-Return Unit36
Assembly Instructions: Unwinding of the Chain from the Chain Reel38
Assembly Instructions: Running Direction of Chain39
Assembly Instructions: Lubricating Points39
Assembly Instructions: Fixing the Chain Tensioner at40
Assembly Instructions: Fixing the Chain Tensioner at as 2/C-H, as 2/R-H, as 2/R-V40
Assembling the Conveyor Chain41
Motor Mounting (MA) = R/L41
Assembling the Conveyor Chain43
Motor Mounting (MA) = M43
Assembling the Conveyor Chain: as 2/C-40045
R-V-120045
R-V-120047
Modifying the Mounting Position of the Motor-Gear Combination or the Gear Motor48
Scanning the Chain Length with Sensor: as 2/R-120052
Electrical Connection of the Product54
Commissioning57
Initial Commissioning57
Residual Risks59
Re-Commissioning after a Standstill61
Operation61
Information on Operation61
Wear61
Measures to Reduce Wear61
Loading the Workpiece Pallet62
Environmental Factors62
Maintenance and Repair63
Cleaning and Care64
Inspection64
Conveyor Chain (Fl at Top Chain / Accumulation Roller Chain)64
Maintenance64
Bearings64
Gear64
Motor64
Conveyor Chain (Fl at Top Chain / Accumulation Roller Chain)65
Possibilities to Lubricate the Conveyor Chain Manually66
LU 2 Automatic Lubrication Unit67
Replacing Wear Parts68
Designations68
Required Tools68
Required Accessories68
As 2/C-10069
Assembly Instructions: Finding a Chain Lock with an Operable Chain70
Assembly Instructions: Fixing the Chain Tensioner at71
As 2/R-120071
Detecting the Chain Length at72
Detecting the Chain Length at SE 2/C-H, SE 2/R-H, SE 2/R-V72
Motor Mounting (MA) = R/L73
Shortening the Conveyor Chain: as 2/C-100, as 2/R-300, Motor Mounting (MA) = M75
Shortening the Conveyor Chain: as 2/C-40077
As 2/R-V-120077
Assembly Instructions: Changing Chain and Wear Parts79
Assembly Instructions: Running Direction of Chain81
Assembly Instructions: Lubricating Points81
Motor Mounting (MA) = R/L82
Changing the Conveyor Chain: as 2/C-100, as 2/R-300, Motor Mounting (MA) = M84
Changing the Conveyor Chain: as 2/C-40087
As 2/R-V-120087
Changing the Connection Belt Roller / Connection Toothed Belt90
Motor Mounting (MA) = R/L91
Replacing the Motor And/Or Gear as 2/C-100, as 2/R-300, Motor Mounting (MA) = R/L91
Replacing the Motor And/Or Gear as 2/C-100, as 2/R-300, Motor Mounting (MA) = M92
Replacing the Gear Motor: as 2/C-40093
As 2/R-V-120094
Changing the Glide Profi Les, Previous and New Section Profi Le95
Changing the Glide Profi Les: KU 2/O98
Changing the Glide Profi Les: SE 2/R99
Changing the Glide Profi Les: SE 2100
Changing the Glide Profi Le from Above: SE 2/C101
Changing the Glide Profi Le from Above: SE 2/R103
Spare Parts105
Decommissioning105
Disassembly and Replacement105
Preparing the Product for Storage/Later Use105
Disposal105
Upgrading and Modifi Cation106
Troubleshooting106
Technical Data107
Ambient Conditions107

Bosch rexroth SE 2/C Series - Page 60

Table of Contents

Related product manuals