BradyPrinter S3700 User Manual 93
Maintenance
Cleaning the Printer
Cleaning the Printer
Cleaning the printer will improve print quality and legibility. It also increases output, machine life,
printer reliability and performance.
Internal Components
To clean residue from the printer:
1. With safety glasses on, spray compressed air on any parts of the printer and keyboard that
have built-up residue.
Note: If compressed air is not available, use a lint-free cloth lightly moistened with Isopropyl alcohol
and wipe off residue.
2. If necessary, use a moistened, lint-free cloth to clean the keyboard keys.
3. Replace the ribbon and labels.
4. Close all covers and plug in the power cord.
To clean dust from the unit:
1. Unplug the printer from the electrical outlet.
2. Remove the ribbon and labels.
3. Using compressed air, spray all visible areas inside the printer to remove accumulated dust.
4. Using a cloth moistened with Isopropyl alcohol, wipe any remaining dust from inside the
printer.
5. Wipe exterior cover and frame of printer for dirt and residue.
CAUTION! Before performing any maintenance which involves opening the
enclosure cover, remove the label supply and ribbon from the
printer and disconnect the power cord.
CAUTION! Always wear safety glasses when using compressed air.
To Next Page
Loading...
