BradyPrinter S3700 User Manual 71
Label Types
Application Label Types
The In-Range Zone provides a visual element on the gauge to show when a system is entering its
optimal or detrimental value.
12. To add or change the size of the in-range zone, under In-Range Zone touch Start Value: data
field and enter the starting value for the range.
13. Under In-Range Zone, touch End Value: data field and enter the ending value for the range.
Note: If you do not want an In-Range Zone, indicate a Start and End Value of 0 (zero).
14. To show the tick numbers on the scale, touch Show Numbers option box (if not already
selected).
To change the font size of the numbers in the gradient scale, with the Show Numbers option box
selected:
15. Touch the Font Size: data field and enter the desired point size of the font.
16. When ready, touch Finish.
GHS/CLP
CLP is the regulation on classification, labeling and packaging of substances and mixtures. This
regulation aligns previous EU legislation on classification, labeling and packaging of chemicals to the
GHS (Globally Harmonized System of Classification and Labeling of Chemicals). Its main objectives
are to facilitate international trade in chemicals and to maintain the existing level of protection of
human health and environment.
To create a GHS/CLP label:
1. Access GHS/CLP label type according to previous procedures (page 65).
2. Under Select Template, touch the desired template format, then touch Next.
3. Under Label Type, choose either a Mono (black only) label or Color (red diamond) label.
4. In the list, touch the desired label size, then touch Next.
5. Touch anywhere on the displayed label to bring up the CLP (GHS) Data dialog box.
6. In the Product Name: data field, enter the name of the chemical (product) you want to use.
OR, if chemical names have been saved (previously used):
Under Primary Language, touch the down arrow next to Product name to display a list of
products, then touch the desired product.
If a second language is to be used on the label, under Second Language:
7. Touch the Second Language option box.
8. Touch the down arrow next to Second Language: data field to display a list of languages.
9. Use the up/down arrows in the list scroll bar to display more languages, then touch the desired
second language.
Note: If using a second language, the product name automatically displays in the chosen language.
10. Touch OK.
11. On the displayed label, touch one of the statements to bring up the CLP (GHS) Statements
dialog box.
To Next Page
Loading...
