BradyPrinter S3700 User Manual 7
Setup
Printer Settings
Printer Settings
The following system default settings can be found under the setup icon .
Note: Instructions denote touching the LCD display’s touchscreen. Alternatively, you can use a
mouse by plugging it into one of the USB ports on the side of printer.
Language
Choose the language in which you want all printer menus, functions, and data displayed.
1. On the touchscreen, touch Menu.
2. Under System, touch Setup.
3. Touch Localization.
4. Select the desired language.
5. Touch OK to save the changes.
Date and Time
The date and time are stored on the printer and automatically increment forward even when the printer
is turned off. Time is based on a 12-hour clock (HH:MM:SS), so you must indicate A.M. or P.M.
1. On the touchscreen, touch Menu.
2. Under System, touch Setup.
3. Touch Clock Settings.
a. To set the date, either select the arrow for the drop-down menu to open the calendar and
use the arrows to select the month or touch the month and date data fields and use the
keyboard to enter the numbers.
b. To set the time, either use the up and down arrows to increase or decrease the time or
touch the hour or minute section in the data fields and use the keyboard to enter the
numbers.
4. Touch OK to save the changes.
To Next Page
Loading...
