BradyPrinter S3700 User Manual 54
Printing
Cancel a Print Job
Cancel a Print Job
System Interruption
If a print job is interrupted due to a system error, for instance when media runs out or you intentionally
open the cover, the system automatically stops the print job and displays a message.
To resume printing, while the job interruption message remains on the screen:
1. Correct the condition that caused the interruption (e.g., replace the labels or ribbon).
2. Touch Resume Current to reprint the current label, then continue printing.
OR
Touch Resume Next to print the next label, then continue printing.
OR
Touch Cancel to cancel the entire print job.
User Interruption
To intentionally cancel a print job once it has started:
1. On the Print Status screen, touch Cancel.
The printer immediately stops printing, displays a print job interrupted message, and
cuts the label.
2. To remove the message from the screen touch OK.
Note: Once Cancel is selected, the print job cannot be resumed until Print is selected again.
Print Preview
The Print Preview function enables you to view your label file prior to printing.
To preview a label:
1. Touch Print.
2. In the Print dialog box, touch Preview.
The entire label is displayed for your review.
If you are previewing multiple copies of a label or a label with serialized data, left and right scroll
arrows display enabling you to preview the multiple labels generated.
3. Touch Next Label or Previous Label to move forward or backward through the generated
labels.
4. To print the labels from the Print Preview screen touch Start Print.
To Next Page
Loading...
