Brady BradyPrinter S3700 - CLP Pipemarkers (Not Available in All Regions)

BradyPrinter S3700 User Manual 79
Label Types
Application Label Types
5. In the Pipe contents dialog box, choose the type of material that flows through the pipe
6. Touch the up/down arrows to view more options in the list.
7. When found, touch the desired contents option to select it, then touch Next.
To add a single arrow or symbol (graphic) to the pipe marker label:
8. On the Symbol Type screen, touch Arrow or Graphic.
Note: If selecting Symbol, the Graphics screen displays. The available graphics are divided into
categories. To change to another category:
9. Touch Change Category.
10. Under Categories, touch the up/down arrows to view more categories in the list.
11. Touch the desired category to select it, then touch OK.
12. On the Graphics screen, touch the left or right double arrows to scroll throughout the list of
available graphics.
13. Touch the desired graphic in the list.
14. When ready, touch Finish.
CLP PipeMarkers (Not available in all regions)
The CLP PipeMarkers include Standard, Rollform, and Arrows-type Pipe Markers, but incorporate the
classification criteria, labeling rules, and graphic symbols used in CLP-GHS labels.
CLP Standard PipeMarker
To use a CLP Standard Pipe Marker label type:
1. From the Home Page, touch More Label Types, then touch CLP Pipe Markers.
2. On the CLP Pipe Marker screen, touch Create New File.
3. On the Pipe Marker Style screen, touch Standard.
4. In the Dimensions dialog, choose a Tape Width that corresponds to the diameter of your pipe,
then touch Next.
5. In the Pipe contents dialog box, choose the type of material that flows through the pipe.
6. Touch the up/down arrows to view more options in the list.
7. When found, touch the desired contents option to select it, then touch Next.
Note: The material selected determines the pipe marker colors based on the selected color norm
in the Pipe Marker setup menu.
8. On the Legend screen, in the Chemical name: field, enter the name of the substance that
flows through the pipe or select from the displayed list.
To enter special characters:
9. Touch the Chemical name: field where the special characters should be placed.
10. Touch Special Characters, then enter the character(s). See “Adding Special Characters” on
page 36 for more detail.
11. When ready, touch Next.