BradyPrinter S3700 User Manual 80
Label Types
Application Label Types
12. On the Comments screen, touch the option box of the single word you want to display on the
label.
OR, to display more than one word:
Touch Other, then enter the desired word or words in the adjacent field.
Note: Be aware that entering long text strings in the “Other” option field (or the following Optional
Comment: field) may reduce the font size to a point where it no longer meets the pipe marking
standard for the selected color norm.
13. Touch the Optional Comment: field and enter additional comments to display on the pipe
marker label, if desired.
14. When ready, touch Next.
Note: You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories.
To change to another category:
15. Touch Change Category.
16. Under Categories, touch the up/down arrows to view more categories in the list.
17. Touch the desired category to select it, then touch OK.
18. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.
19. Touch the desired graphic in the list.
20. Repeat the above two steps to add another graphic.
21. When ready, touch Next.
Note: Arrows can be added to a pipe marker label according to the standards defined by the country
or region.
22. On the Arrows screen, touch the option box designating where you want the arrows to display
- Before Legend and/or After Legend. (You can select both or none.)
23. Click Next.
24. To cut out the CLP Pipe Marker label, go to the Cut Out Label screen and select No Cut,
Around Label or Around Arrows.
25. When ready, touch Finish.
To Next Page
Loading...
