BradyPrinter S3700 User Manual 81
Label Types
Application Label Types
CLP Rollform Pipe Marker
To use a CLP Rollform Pipe Marker label type:
1. From the Home Page, touch More Label Types, then touch CLP Pipe Markers.
2. On the CLP Pipe Marker screen, touch Create New File.
3. On the Pipe Marker Style screen, touch Rollform.
4. In the Dimensions dialog, touch the Pipe diameter: data field and enter the diameter of the
pipe to which the label will be affixed.
5. In the Tape width: field, touch the desired Tape Width, then touch Next.
6. In the Pipe contents dialog box, choose the type of material that flows through the pipe.
7. Touch the up/down arrows to view more options in the list.
8. When found, touch the desired contents option to select it, then touch Next.
Note: The material selected determines the pipe marker colors based on the selected color norm
in the Pipe Marker setup menu.
9. On the Legend screen, in the Chemical name: field, enter the name of the substance that
flows through the pipe or select from the displayed list.
10. To enter special characters, touch the Chemical name: field where the special characters
should be placed.
11. Touch Special Characters, then enter the character(s). See “Adding Special Characters” on
page 36 for more detail.
12. When ready, touch Next.
13. On the Comments screen, touch the option box of the single word you want to display on the
label.
OR, to display more than one word:
Touch Other, then enter the desired word or words in the adjacent field.
Note: Be aware that entering long text strings in the “Other” option field (or the following Optional
Comment field) may reduce the font size to a point where it no longer meets the pipe marking
standard for the selected color norm.
14. Touch the Optional Comment: field and enter additional comments to display on the pipe
marker label, if desired.
15. When ready, touch Next.
Note: You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories.
To change to another category:
16. Touch Change Category.
17. Under Categories, touch the up/down arrows to view more categories in the list.
18. Touch the desired category to select it, then touch OK.
19. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.
20. Touch the desired graphic in the list.
21. Repeat the above two steps to add another graphic.
22. When ready, touch Finish.
To Next Page
Loading...
