BradyPrinter S3700 User Manual 82
Label Types
Application Label Types
CLP Arrow Pipe Marker
To create a CLP symbol or arrow pipe marker:
1. From the Home Page, touch More Label Types, then touch CLP Pipe Markers.
2. On the CLP Pipe Marker screen, touch Create New File.
3. On the Pipe Marker Style screen, touch Symbol or Arrow Tape.
4. In the Dimensions dialog, touch the Pipe diameter: data field and enter the diameter of the
pipe to which the label will be affixed.
5. Under Tape width: touch the desired Tape Width, then touch Next.
6. In the Pipe contents dialog box, choose the type of material that flows through the pipe.
7. Touch the up/down arrows to view more options in the list.
8. When found, touch the desired contents option to select it, then touch Next.
9. On the Symbol Type screen, touch the arrow or graphic to add to the label.
If selecting Symbol, the Graphics screen displays. The available graphics are divided into
categories.
To change to another category:
10. Touch Change Category.
11. Under Categories, touch the up/down arrows to view more categories in the list.
12. Touch the desired category to select it, then touch OK.
13. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.
14. Touch the desired graphic in the list.
15. When ready, touch Finish.
HSID Pipe Markers (Not available in all regions)
The HSID PipeMarkers include Standard, Rollform, and Arrows-type PipeMarkers, but incorporate the
classification criteria, labeling rules, and graphic symbols used in HSID education and labeling
standards.
HSID Standard Pipe Marker
To use an HSID Standard Pipe Marker label type:
1. From the Home Page, touch More Label Types, then touch HSID Pipe Markers.
2. On the HSID Pipe Marker screen, touch Create New File.
3. On the Pipe Marker Style screen, touch Standard.
4. In the Dimensions dialog, choose a Tape Width that corresponds to the diameter of the pipe,
then touch Next.
5. In the Pipe contents dialog box, choose the type of material that flows through the pipe
6. Touch the up/down arrows to view more options in the list.
7. When found, touch the desired contents option to select it, then touch Next.
Note: The material selected determines the pipe marker colors based on the selected color norm
in the Pipe Marker setup menu.
To Next Page
Loading...
