BradyPrinter S3700 User Manual 57
Printing
Printing Labels Created on a Computer or Device
Printing Labels Created on a Computer or Device
To print labels that were created using labeling software, such as Brady Workstation, on a computer
do one of the following:
• Connect to the printer over a Wi-Fi network (if your model supports Wi-Fi).
• Use an Ethernet cable to connect the computer to the printer.
• If using the Brady Express Labels app, connect to the printer using Bluetooth or over a Wi-Fi network
(if your model supports these options).
• Use the USB cable to connect the computer to the printer.
Copies
You can print a number of copies of a single label or a range of labels in a multi-label (series) file. The
printer as a standalone printer does not support collating copies. Only when attached to a computer
can it print collated copies. The labeling software determines how copies of labels are printed.
To print a number of copies:
1. Touch Print.
2. For a single label, in the Copies: field, enter the number of copies desired.
Note: When printing serialized labels, you can either print one copy of ALL the labels in the series,
or you can print a sub-set (range) of the labels. When printing a range of labels in a series,
use the Select labels feature.
3. Touch Select Labels option box, to place a checkmark in the box.
4. Touch the From label: field and enter the number of the first label to be printed.
5. Touch the To label: field and enter the number of the last label to be printed.
6. When ready to print, touch Start Print.
XY Cutting
XY Cutting is the action of cutting out objects or text using the plotter cutter inside your printer. The
cutter follows the shape of the object or text. All objects can be printed OR cut, but not both
simultaneously.
You can also cut out a label that has been framed. The plotter cutter cuts around the outside edge of
the frame line.
You can cut around an object that is enclosed by a cut bounding box. A cut bounding box is a border
you can set around objects that you want to print AND cut. The plotter cutter cuts the box shape, not
the shape of the object inside it.
To Next Page
Loading...
