Brady BradyPrinter S3700 - Bluetooth; Usb

BradyPrinter S3700 User Manual 14
Setup
Connecting the Printer
Bluetooth
This capability is only available on select printer models. Look for the Bluetooth symbol on your printer
to know if this feature is supported.
To connect the printer to a mobile device via Bluetooth:
1. On the touchscreen, touch Menu.
2. Under System, touch Setup.
3. Touch Connection.
4. Select Bluetooth.
5. Touch the checkbox to enable Bluetooth.
6. From the Express Label Mobile App
, select the More Menu.
7. Select Printers, wait for 10 seconds and watch for the printer [S3700-PGS37xxxxxxx] to
appear.
8. Tap on the printer [S3700-PGS37xxxxxxx]
9. Click Done after the connection between the printer and Express Label Mobile App is
established.
To disconnect Bluetooth from the printer:
1. Touch Menu.
2. Under System, touch Setup.
3. Touch Connection.
4. Select Bluetooth.
5. Touch the checkbox to disable Bluetooth.
Wi-Fi and Bluetooth Status
To check what, if any, Wi-Fi and Bluetooth connections are established on the printer, follow these
steps:
1. Touch Menu.
2. Under System, touch Setup.
3. Touch Connection > Status Summary.
Up to five devices can be connected to the printer at the same time.
USB
To connect to a computer via USB 2.0, plug the provided USB cable into the printer and the computer.
Brady Workstation software automatically detects the printer when connected via USB cable.
Note: If you are not using Brady Workstation software, you need to install the printer driver. See the
Driver Installation Guide PDF file on the USB drive that came with the printer.