BradyPrinter S3700 User Manual 2
Introduction
Compatible Software
Physical and Environmental Characteristics
The BradyPrinter S3700 printer has the following physical and environmental characteristics:
Note: The table below refers to the BradyPrinter S3700 printer only. Consumable performance
may vary.
Proximity Range for Bluetooth
The printer should be within 65 ft (19.8 m) of the device to pick up the Bluetooth signal.
Note: Obstacles between the printer and Bluetooth receiver can shorten the range.
Note: Bluetooth is an optional feature that may not be on your printer.
Physical U.S. Units Metric Units
Dimensions 18.5" W x 11" H x 14.2" D 470 x 280 x 360 mm
Weight 35 lb. 20 kg
Environmental Operation Storage
Temperature (Printer)
Exposing the printer to direct
sunlight is not recommended.
50° to 104° F (15° to 40° C) -4° to 122° F (-20° to 50° C)
Relative Humidity (Printer)
15% to 80% (non-condensing) 15% to 90% (non-condensing)
CAUTION! Avoid using the printer near water, in direct sunlight, or near a
heating device.
To Next Page
Loading...
