Brady BradyPrinter S3700 - Page 82

BradyPrinter S3700 User Manual 73
Label Types
Application Label Types
6. On the Label Size screen, in the list presented, touch the desired label size, then touch Next.
7. On the Chemical Name screen, in the Name: data field, enter the name of the chemical that
the Right-to-Know label addresses.
8. In the Cas#/Title: data field, enter the case number and or title of the label, then touch Next.
9. On the Signal Word screen, in the list presented, touch the Signal Word to use on the label.
(Selecting No Signal Word will leave this space blank on the label.)
10. Touch Next.
11. On the Health Hazard screen, in the list provided, touch the health hazard rating to be used on
the label, then touch Next.
12. On the Fire Hazard screen, in the list provided, touch the fire hazard rating to be used on the
label, then touch Next.
13. On the Instability screen, in the list provided, touch the instability rating to be used on the label,
then touch Next.
14. On the Specific Hazard screen, in the list provided, touch the specific hazard rating to be used
on the label, then touch Next.
15. On the Physical and Health Hazard screen, in the displayed list under Available:, touch the
hazard to include on the label. (Use the up/down arrows of the scroll bar to view more
options.)
16. Touch Include to include the hazard on the label.
17. Repeat the above two steps to include as many hazards as required.
18. To remove items from the Included list, touch the hazard in the Included list, then touch
Remove.
19. When ready, touch Next.
20. On the Target Organs screen, in the Available: list, touch any body organs that could be
affected by the hazardous chemical being advertised on the Right-to-Know label, then touch
Include.
21. Repeat the above step to include as many target organs as required.
22. To remove items from the Included list, touch the target organ in the Included list, then touch
Remove.
23. When ready, touch Next.
24. On the Comments screen, in the Comments: data field, enter any noteworthy information to
better explain the necessary precautions or health risks the Right-to-Know label is explaining.
25. When ready, touch Next.
26. On the Graphics screen, touch the desired graphic to add to the label. You can add as many
graphics as required.
Note: The available graphics are divided into categories.
To change to another category:
1. Touch Change Category.
2. Under Categories, touch the up/down arrows to view more categories in the list.
3. Touch the desired category to select it, then touch OK.
4. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.