BradyPrinter S3700 User Manual 87
Label Types
Application Label Types
To create a WHMIS label:
1. From the Home Page, touch More Label Types.
2. In the list of Label Types, touch WHMIS.
3. On the Select Template screen, under Category, touch the desired template category to use
for the WHMIS label.
4. In the list of templates displayed, touch the desired template.
5. On the label in the Editor, touch the various elements displayed and enter the appropriate data
for that element (i.e., graphics, text, barcode, etc.), according to standard procedures. (See
label formatting options, starting on page 24.)
The template displays in the Editor.
Note: Depending on the WHMIS template selected, text and graphic data fields are present,
requesting information. The data fields for user-supplied information are depicted as the word
Text enclosed brackets (<Text>) or a generic graphic boundary box.
To access these data fields:
6. Touch the data field to enter data or touch Next Object.
Note: Using the Next Object button will consecutively advance through the data fields, until all data
fields have been filled.
When accessing a graphic data field (either by touching or using the Next Object button), the Select
Graphic screen immediately displays.
The WHMIS category is selected by default, however you can select a different category if desired.
7. Touch the desired graphic.
The selected graphic is immediately displayed on the WHMIS label in the Editor.
Note: On the Select Graphic screen, touch Cancel if you do not want to add a graphic.
To Next Page
Loading...
