Brainlab ExacTrac - Page 118

Recess Position for 17” Floor Box
The following image shows the recess position for a 17” floor box:
45°
802
+14mm
1134
+20mm
802
+14mm
Cable conduit
Isocenter
Ø130mm
Cable conduit
Ø130mm
Linac Baseframe
Figure 51
See page 119
for worst case positioning.
All dimensions for positioning floor boxes are based on the isocenter height of 1295 mm
+/- 20 mm (finished floor line – isocenter). The exact value depends on the linac type.
Please refer to the respective documentation. If the vertical isocenter position is not within
the tolerance range, please contact Brainlab.
17” Floor Boxes for X-Ray Tubes
118 Site Planning Manual Rev. 1.0
ExacTrac Ver. 6.x