BRAKE
KUKJE MACHINERY CO., LTD.
117
5. CHECKING, DISASSEMBLING AND SERVICING
2) Separating Rear Axle Case
<Branson 2100, 2400, 2800 Euro>
< Draining transmission fluid >
1. Place an oil pan underneath the transmission
case, and remove the drain plugs(1).
2. Drain the transmission fluid.
3. Reinstall the drain plug.
▷ Refilling
9 Fill new oil into filling port after removing the
filling plug(2) up to the upper notch on the
dipstick(3).
9 After running the engine for few minutes, stop it
and check the oil level again, if low, add oil to
proper level.
◈ Important
¾ Use only multi-grade transmission oil. Use of
other oils may damage the transmission or
hydraulic system.
¾ Never work the tractor immediately after
changing the transmission oil. Keep the engine
at medium speed for a few minutes to prevent
damage to the transmission.
¾ Do not mix different brands oil together.
Front case
3.0 L
0.79 U.S.gals
0.66 lmp.gals
2100
2400
2800
Rear case
13.0 L
3.43 U.S.gals
2.86 lmp.gals
Transmission
fluid capacity
HST Rear case
15.0 L
3.96 U.S.gals
3.3 lmp.gals
*. PART NAME
1) Drain plug 2) Filling cap
3) Dipstick
(1)
(1)
(1)
(2)
(3)
To Next Page
Loading...
