Brocade Communications Systems FastIron User Manual

Syntax
show sysmon counters type { error | link }
show sysmon counters { ecc-error | link-error }
Parameters
type
The event type for which sysmon counters are displayed. For FSX devices, the options are
all, fa (fabric adapter), pp (packet processor), and xbar (cross bar). For FCX and ICX
devices, the options are ecc-error and link-error. The default value is all.
error
Displays the error counter for the specified event type.
link
Displays the link error counters. You can specify either all or specific links.
ecc-error
Displays the ECC error count on FCX and ICX devices. This option is not supported on FSX
devices.
stack-unit
Specifies the stack unit on which errors to be displayed.
all
Displays errors for all stack units.
link-error
Displays the link error count on FCX and ICX devices. This option is not supported on FSX
devices.
stack-unit
Specifies the stack unit on which errors to be displayed.
all
Displays errors for all stack units.
Modes
Privileged EXEC mode.
Global configuration mode.
Examples
The following displays all fabric adaptor statistics on an FSX device:
Brocade# show sysmon counters fa link all
Sysmon FA HG.link error detected (number of times)
FA-link0 FA-
link1 FA-link2 FA-link3
SLOT FA-dev Sync/FC(RX,TX) Sync/
FC(RX,TX) Sync/FC(RX,TX)Sync/FC(RX,TX)
1 0 0/(0,0) 0/(0,0) 0/
(0,0) 0/(0,0)
2 2 0/(0,0) 0/(0,0) 0/
(0,0) 0/(0,0)
9 16 1751/(1750,1750) 0/(0,0) 0/
(0,0) 0/(0,0)
9 17 0/(0,0) 0/(0,0) 0/
(0,0) 0/(0,0)
System Monitoring
FastIron Ethernet Switch Administration Guide 279
53-1003625-01

Brocade Communications Systems FastIron Specifications

General

Brand	Brocade Communications Systems
Model	FastIron
Category	Switch
Language	English