NTP associations detail command output descriptionsTABLE 6
Field Description
server Indicates server is statically configured.
symmetric active peer Indicates peer is statically configured.
symmetric passive peer Indicates peer is dynamically configured.
sys_peer This peer is the system peer
candidate This peer is chosen as candidate in the combine algorithm.
reject This peer is rejected by the selection algorithm
falsetick This peer is dropped as falseticker by the selection algorithm
outlyer This peer is dropped as outlyer by the clustering algorithm
Stratum Stratum number
ref ID IPv4 address or hash of IPv6 address of the upstream time server to which the peer is
synchronized.
Time Last time stamp that the peer received from its master.
our mode This system's mode relative to peer (active/passive/client/server/bdcast/bdcast client).
peer mode Mode of peer relative to this system.
our poll intvl This system's poll interval to this peer.
peer poll intvl Poll interval of peer to this system
root delay The delay along path to root (the final stratum 1 time source).
root disp Dispersion of path to root.
reach peer The peer reachability (bit string in octal).
Delay Round-trip delay to peer.
offset Offset of a peer clock relative to this clock.
Dispersion Dispersion of a peer clock.
precision Precision of a peer clock.
version Peer NTP version number.
org time Originate time stamp of the last packet.
Basic Software Features
FastIron Ethernet Switch Administration Guide 51
53-1003625-01
To Next Page
Loading...
Need help?
General
