Brocade Communications Systems MLX Series User Manual

376 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Replacing fan assemblies
8
FIGURE 249 Removing the louver on a legacy chassis.
The louvers will fall out of the fan assembly faceplate as you pull out the roll pins. Refer to
Figure 249.
4. Remove the fan assembly handle by detaching the two screws from the inside of the fan
assembly faceplate using a Phillips screwdriver. Refer to Figure 250.
FIGURE 250 Handle removal
5. Orient the upward deflector on the fan assembly faceplate so that the exhaust will flow upward
and the holes in the upward deflector align with the holes where the screws secure the handle
to the fan assembly faceplate. Refer to Figure 250 in step 4.

Brocade Communications Systems MLX Series Specifications

General

Brand	Brocade Communications Systems
Model	MLX Series
Category	Network Router
Language	English