Brocade Communications Systems NetIron MLXe Series User Manual

3. Insert a new lter, being careful that it aligns within the narrow channel.
4. Repeat steps 2 and 3 to replace the second lter.
5. Replace the air inlet cover and tighten the four captive screws to secure the air lter to the router.
FIGURE 116 Air lter removal and replacement for 32-slot routers
1 Direction of airow in device
Replacing the air lter in Brocade MLXe 4-slot and 8-slot routers
Follow these steps to replace the air
lter in Brocade MLXe Series 4-slot and 8-slot routers.
1. Loosen the two screws in the front of the lter tray.
Replacing fan assemblies
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 263

Brocade Communications Systems NetIron MLXe Series Specifications

General

Brand	Brocade Communications Systems
Model	NetIron MLXe Series
Category	Network Router
Language	English