TABLE 8 Interface modules for all Brocade MLXe Series routers (continued)
SKU Ports Description Generation
BR-MLX-100GX2-CFP2-X2 2 Brocade MLXe two (2)-port 100-
GbE (X2) module with IPv4/IPv6/
MPLS hardware support. Requires
CFP2 optics. Supports
simultaneous 2M IPv4 and 0.8M
IPv6, or simultaneous 1.5M IPv4
and 1M IPv6 routes in FIB.
Requires high speed switch fabric
module.
Gen 3
BR-MLX-10Gx20-M 20 Brocade MLXe twenty (20)-port
10-GbE/1-GbE (M) combo
module with IPv4/IPv6/MPLS
hardware support. Requires SFP+
and SFP optics. Supports 512K
IPv4 routes in FIB. Requires high
speed switch fabric modules
Gen 3
BR-MLX-10Gx20-X2 20 Brocade MLXe twenty (20)-port
10-GbE/1-GbE (X2) combo
module with IPv4/IPv6/MPLS
hardware support. Requires SFP+
and SFP optics. Supports
simultaneous 2M IPv4 and 0.8M
IPv6, or simultaneous 1.5M IPv4
and 1M IPv6 routes in FIB.
Requires high-speed switch fabric
modules.
Gen 3
NI-MLX-10GX2 2 NetIron MLX Series 2-port 10-
GbE module with IPv4/IPv6/MPLS
hardware support. Requires XFP
optics.
Gen 1
1
NI-XMR-10GX2 2 NetIron XMR Series 2-port 10-
Gbps Ethernet module. Requires
XFP optics. IPv4, IPv6, MPLS
support.
Gen 1
1
BR-MLX-100GX-1 1 MLXE/XMR/MLX 1-port 100-
GbE (X) Module with IPv4/IPv6/
MPLS hardware support - requires
CFP optics. Supports 1M IPv4
routes in FIB in XMR mode and
512K IPv4 routes in MLX mode.
Requires high speed switch fabric
modules. License upgradable to 2-
ports on a MLXe.
Gen 2
BR-MLX-100GX-2 2 MLXE 2-port 100-GbE (X) Module
with IPv4/IPv6/MPLS hardware
support - requires CFP optics.
Supports 1M IPv4 routes in FIB in
XMR mode and 512K IPv4 routes
in MLX mode. Requires high speed
switch fabric modules.
Gen 2
NI-MLX-10GX4 4 NetIron MLX Series 4-port 10-
GbE module with IPv4/IPv6/MPLS
hardware support. Requires XFP
optics.
Gen 1.1
NI-XMR-10GX4 4 NetIron XMR Series 4-port 10-
GbE module with IPv4/IPv6/MPLS
Gen 1.1
Router modules
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 33