TABLE 8 Interface modules for all Brocade MLXe Series routers (continued)
SKU Ports Description Generation
hardware support. Requires XFP
optics.
BR-MLX-10GX4-X 4 XMR/MLXe 4-port 10-GbE (X)
module with IPv4/IPv6/MPLS
hardware support. Requires XFP
optics. Supports 1M IPv4 routes in
FIB.
Gen 1.1
BR-MLX-10Gx4-X-ML 4 MLX/MLXe 4-port 10-GbE (ML)
module with IPv4/IPv6/MPLS
hardware support. Requires XFP
optics. Supports 512K IPv4 routes
in FIB. License upgradable to "X"
scalability (1M IPv4 routes in FIB).
Gen 1.1
BR-MLX-40Gx4-M 4 MLXe 4-port 40-GbE (M) module
with Layer 2, IPv4/IPv6, MPLS and
OpenFlow support. Supports 512K
IPv4 routes in FIB. Requires high
speed switch fabric modules and
QSFP+ optics.
Gen 2
NI-MLX-10GX8-M 8 Brocade NetIron MLX Series 8-
port 10-GbE (M) module with
IPv4/IPv6/MPLS hardware
support. Requires SFPP optics.
Supports 512K IPv4 routes in FIB.
Requires high speed switch fabric
modules
Gen 2
NI-MLX-10GX8-D 8 Brocade NetIron MLX Series 8-
port 10-GbE (D) module with IPv4/
IPv6 hardware support. Requires
SFPP optics. Supports 256K IPv4
routes in FIB. Does not support
MPLS. Requires high speed switch
fabric modules
Gen 2
BR-MLX-10GX8-X 8 MLXe/XMR 8-port 10-GbE (X)
module with IPv4/IPv6/MPLS
hardware support-requires SFPP
optics. Supports 1M IPv4 routes in
FIB. Requires high speed switch
fabric modules.
Gen 2
NI-MLX-1GX20-SFP 20 NetIron MLX Series 20-port
FE/GE (100/1000) module with
IPv4/IPv6/MPLS hardware
support. Requires SFP optics. Note:
Copper SFPs are supported at
1000Mbps only.
Gen 1
1
NI-XMR-1GX20-SFP 20 NetIron XMR Series 20-port
FE/GE (100/1000) module with
IPv4/IPv6/MPLS hardware
support. Requires SFP optics. Note:
Copper SFPs are supported at
1000Mbps only.
Gen 1
1
NI-MLX-1GX20-GC 20 NetIron MLX Series 20-port
10/100/1000 copper module with
IPv4/IPv6/MPLS hardware
support.
Gen 1
1
Router modules
Brocade NetIron MLXe Series Hardware Installation Guide
34 53-1004203-04
To Next Page
Loading...
Need help?
General
