show cam-partition usage
The show cam-partition usage command displays the CAM partition usage. IP CAM region is divided into partition and sub-
partitions, with the super netting feature managing entries within these partitions and sub-partitions to achieve LPM (longest
prex match). Entries are shued across the sub-partition based on prex length.
Syntax
show cam-partition usage
Examples
device#sh cam-partition usage
CAM partitioning profile: multi-service-3
XPP44GEX 0:
[IPV6 Session] 8192(size), 8192(free), 0. 0%(used)
:IPv6 Multicast: 2048(size), 2048(free), 0. 0%(used)
:Receive ACL: 0(size), 0(free), 0. 0%(used)
:Rule ACL: 6144(size), 6144(free), 0. 0%(used)
[Session] 32768(size), 32767(free), 0. 0%(used)
:IP Source Guard Denial: 0(size), 0(free), 0. 0%(used)
:IP Source Guard Permit: 0(size), 0(free), 0. 0%(used)
:Rule-based ACL: 23552(size), 23552(free), 0. 0%(used)
:Broadcast ACL: 0(size), 0(free), 0. 0%(used)
:Receive ACL: 1024(size), 1023(free), 0. 9%(used)
:IP Multicast: 8192(size), 8192(free), 0. 0%(used)
:IP Multicast 1G: 0(size), 0(free), 0. 0%(used)
:IP Multicast 2GM: 0(size), 0(free), 0. 0%(used)
:Open Flow CatchAll: 0(size), 0(free), 0. 0%(used)
:Open Flow UnProtected: 0(size), 0(free), 0. 0%(used)
:Open Flow Normal: 0(size), 0(free), 0. 0%(used)
:Open Flow Protected: 0(size), 0(free), 0. 0%(used)
[MAC] 131072(size), 131067(free), 0. 0%(used)
:Protocol: 10(size), 5(free), 50. 0%(used)
:Forwarding: 131024(size), 131024(free), 0. 0%(used)
:Flooding: 8(size), 8(free), 0. 0%(used)
:Port BUM RL: 30(size), 30(free), 0. 0%(used)
[Out Session] 32768(size), 32768(free), 0. 0%(used)
[Out V6 Session] 8192(size), 8192(free), 0. 0%(used)
[Internal Forwarding Lookup] 131072(size), 131072(free), 0. 0%(used)
:IFL Main: 131062(size), 131062(free), 0. 0%(used)
:IFL Openflow CatchAll: 10(size), 10(free), 0. 0%(used)
[IP VPN] 196608(size), 196608(free), 0. 0%(used)
[IP] 262144(size), 262123(free), 0. 0%(used)
[IPV6] 65536(size), 65534(free), 0. 0%(used)
[IPV6 VPN] 131072(size), 131068(free), 0. 0%(used)
History
Release version Command history
NetIron R05.8.00 This command was introduced.
Router modules
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 41