Brother BAS-311E - Adding Embroidery Point before the First Stitch

Programmer
148
Chapter 3 Programming with Command Function
4. The needle point moves to 1'.
5
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
6
Ending program
1. Press
P
.
Adding sewing point before the first stitch
A point is added before the current sewing point to
change the sewing start position.
The example in the left is used for explanation of
changing the sewing start position from 1 to 1'.
1
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
2
Moving to position 1.
1. Press
1
and press .
The work clamp moves to the start position.