Brother BAS-311E - Creating a Circle

Programmer
84
Chapter 2 Programming with Help Function
3. Move the needle with and press .
4. Press twice at the sewing end position.
Creating a circle
The following five options are available for creating a circle.
Creating a circle by specifying 3 points on the circumference
Creating a circle of the specified diameter in the clockwise direction
Creating a circle of the specified diameter in the counterclockwise direction
Creating a circle of the specified radius in the clockwise direction
Creating a circle of the specified radius in the counterclockwise direction
1. Select and press .
2. Select the method of creating a circle and press .
Stitch length
Distance from the previous point in the
direction of X or Y axis
Check that both values are
0.00 mm.
Remaining plot count