Brother BAS-311E - Creating a Zigzag Stitch

Programmer
89
Chapter 2 Programming with Help Function
3. Select the third point and press .
If are selected
1. Input the zigzag stitch width, stitch length and the overlap stitch count,
then press
.
Values of 0 - 9 are available for input.
2. Move the neelde with to select the second point and press .
Creating a zigzag stitch
The following three options are available for zigzag stitch.
Creating a zigzag stitch on the sewing path
Creating a zigzag stitch on the left side of the sewing path
Creating a zigzag stitch on the right side of the sewing path
One to 99 points are available for plotting.
1. Select
and press .
Zigzag pitch
Stitch count for overlap sewing
Press for selection.
Zigzag width
Distance from the previous point in
the direction of X or Y axis
Remaining plot count