Programmer
86
Chapter 2 Programming with Help Function
If are selected
1. Input the stitch length and the overlap stitch count, then press .
Values of 0 - 9 are available for input.
2. Move the needle with and press .
Creating an arc
1. Select and press .
2. Input the stitch length and press .
3. Move the needle with to select the second point, then press .
Stitch length
Stitch count for overlap sewing
Press for selection.
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
Stitch length
Distance from the previous point in the
direction of X or Y axis
Remaining plot count
To Next Page
Loading...
