Brother BAS-311E - Moving the Pattern in Parallel 2

Programmer
74
Chapter 2 Programming with Help Function
4
Ending program
1. Press
P
.
Moving the pattern in parallel 2
The program data is moved in parallel. The example
in the left is used for explanation of moving the
pattern in parallel when the first stitch is the escape
point.
1
Calling data
1. Press
P
.
The work clamp moves to the home position. The programmer
screen is displayed.
2. Select with and press .
3. Select
with and press .
4. Input the data number and press
.
5. Press

ESCESC
.
2
Moving
1. Select with and press .