Brother BAS-311E - Feed

Programmer
36
Chapter 2 Programming with Help Function
3
Saving
1. Select with and press .
2. Select
with and press .
3. Input the data number and press .
4. Press

ESCESC
.
4
Ending program
1. Press
P
.
Feed
After thread breaking, a feed is set for continuous
sewing with the work clamp in position.
The example in the left is used for explanation of
programming pattern 2 with a feed after pattern 1.
1
Programming
1. Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2. Select with and press .
Pattern 1
Pattern 2