Chaprter 3 Programming with Command Function
Programmer
151
4
Deleting 1
1. Press
2
and press .
The needle point moves to the first stitch, point A and the first
stitch.
2. Press
C
.
3. Input the number of stitches to be deleted
and press
.
The example is deleting 1 stitch. Press
1
.
4. The needle point moves to A.
5
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
6
Ending program
1. Press
P
.
To Next Page
