Brother BAS-311E - Page 40

Programmer
39
Chapter 2 Programming with Help Function
3. Move the work clamp with . Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select with and press .
5. Move the work clamp with
. Press
when the needle point is at point B of the
pattern.
6. Repeat step 5 and create the program to
point C.
7. When point C is programmed, press

ESCESC
.
8. Select
with and press .
9. Move the work clamp with
. Press
when the needle point is at point D of the
pattern.
10. Repeat step 9 and create the program to
point F.
11. Press

ESCESC
.
12. Select
with and press .
13. Create the program to point H.
14. When point H is programmed, press

ESCESC
.