Programmer
69
Chapter 2 Programming with Help Function
3
Programming a new point.
1. Select with and press .
2. Move the work clamp with
. Press
when the needle point is at B.
B is programmed.
3. Press
ESCESC
.
4
Deleting 1
1. Select with and press .
2. Press
1
and press .
The work clamp moves to the sewing start position.
3. Press
ESCESC
.
4. Select
with and press .
5. Input the number of stitches to be deleted
and press
.
The example is deleting 1 stitch. Press
1
.
6. The needle point moves to B.
7. Press
ESCESC
twice.
To Next Page
