Programmer
71
Chapter 2 Programming with Help Function
3. Select with and press .
4. Input the data number and press
.
5. Press
ESCESC
.
2
Moving to position A
1. Select with and press .
2. Press
1
and press .
The work clamp moves to the start position.
3. Press
ESCESC
.
3
Deleting A
1. Select with and press .
2. Input the number of stitches to be deleted
and press
.
The example is deleting 1 stitch. Press
1
.
3. The needle point moves to 1.
4. Press
ESCESC
twice.
To Next Page
