2-19
Confidential
Error
Codes
Description
Refer
to:
Error
Codes
Description
Refer
to:
9501 *1 9C02 *1
9502 *1 9C03 *1
9503 *1 9C06 *1
9504 *1 9C07 *1
9505 *1 9D02 *1
9601 *1 9D03 *1
9608 *1 9D04 *1
9701
For 2-sided printing, paper size setting of
the printer driver that was not supported
by 2-sided printing was selected.
2-73 9D05 *1
9702
When printing from the T1, the size of
paper specified from the driver set the
size which was not supported by the T1.
2-73 A000 *1
9703 *1 A200 *1
9704 *1 A300 *1
9705 *1 A400 *1
9706 *1 A500 *1
9801
An error occurred with the value measured
during color density adjustment performed
from the control panel.
2-74 A600 *1
9802
Dot counter or develop roller counter
of color toner has reached the upper
limit during color density adjustment
performed from the control panel.
2-74 A700 *1
9803
Density patch measurement ended
unsuccessfully during color density
adjustment performed from the control panel.
2-75 A800 *1
9804
An error occurred with the value measured
during density sensor sensitivity calibration.
2-75 A900 *1
9901
An error occurred with the value measured
during manual color registration performed
from the control panel.
2-76 AB00 *1
9902
Dot counter or develop roller counter of color toner
has reached the upper limit during auto color
registration performed from the control panel.
2-76 AC00 *1
9903
An error occurred during patch data
printing in manual color registration
performed from the control panel.
2-77 AD00 *1
9A01
An error occurred with the value
measured during auto color registration
performed from the control panel.
2-78 AE00 *1
9A02
Dot counter or develop roller counter of color toner
has reached the upper limit during auto color
registration performed from the control panel.
2-78 AF00 *1
9A03
An error occurred during patch data
printing in auto color registration
performed from the control panel.
2-79 B000 *1
9B01 *1 B700 *1
9B02 *1 B800 *1
9B03 *1 B900 *1
9B04 *1 BB00 *1
9B05 *1 BC00 *1
9B06 *1 BD00 *1
9C01 *1 BF00 *1
To Next Page
Loading...
