Home > Fax > Receive a Fax > Memory Receive Options > Use PC-Fax Receive to Transfer Received
Faxes to Your Computer (Windows
®
only)
Use PC-Fax Receive to Transfer Received Faxes to Your Computer
(Windows
®
only)
Related Models: MFC-J985DW
Turn on the PC-Fax Receive feature, automatically store incoming faxes to your machine's memory, and then
send them to your computer. Use your computer to view and store these faxes.
• This feature is available only for monochrome faxes. When you receive a colour fax, your machine prints the
colour fax but does not send the fax to your computer.
• Before you can set up PC-Fax Receive, you must install the Brother software and drivers on your computer.
Make sure your computer is connected and turned on. You must have the PC-FAX Receiving software
running on your computer.
Even if your computer is turned off, your machine will receive and store faxes in its memory. When you start your
computer and the PC-FAX Receiving software runs, your machine transfers faxes to your computer
automatically.
1. Press
[Settings] > [All Settings] > [Fax] > [Setup Receive] > [Memory Receive].
2. Press a or b to display the [PC Fax Receive] option, and then press it.
The Touchscreen displays the message [Run PC-Fax on your computer.]
3. Press [OK].
4. Press [<USB>] or press the name of the computer you want to receive faxes if you are on a network. Press
[OK].
5. Press [Backup Print: On] or [Backup Print: Off].
When Fax Preview is turned on, a backup copy of received faxes will not be printed, even if you select
[Backup Print: On].
6. Press .
To change the destination computer, repeat these steps.
Related Information
• Memory Receive Options
• Transfer Your Faxes or Fax Journal Report
• Transfer Faxes to Your Computer
• Receive Faxes Using PC-FAX Receive (Windows
®
)
238
To Next Page
Loading...
Need help?
General
Weight and Dimensions
