Authentication Methods for a Personal Wireless Network
A personal wireless network is a small network (such as a home wireless network) without IEEE 802.1x
support.
• Open system
Wireless devices are allowed to access the network without any authentication.
• Shared key
A secret pre-determined key is shared by all devices that will access the wireless network. The Brother
wireless machine uses the WEP key as the pre-determined key.
• WPA-PSK/WPA2-PSK
Enables a Wi-Fi Protected Access
®
Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK (WPA-Personal).
Auto Reduction
Reduces the size of incoming faxes.
Automatic Fax Transmission
Sending a fax without picking up the handset of the external telephone.
Automatic Redial
A feature that enables your machine to redial the last fax number after five minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax that is received and stored in memory. This is a safety feature so you will
not lose messages during a power failure.
Batch Transmission
As a cost saving feature, all delayed faxes to the same fax number will be sent as one transmission.
Beeper Volume
Volume setting for the sound when you press a button or make an error.
BOOTP
The Bootstrap Protocol (BOOTP) is a network protocol used by a network client to obtain an IP Address from a
configuration server.
To use BOOTP, contact your network administrator.
Home > Glossary
561
To Next Page
Loading...
Need help?
General
Weight and Dimensions
