Remote Access Code
Your own four-digit code (– – –*) that allows you to call and access your machine from a remote location.
Remote Activation Code (Fax/Tel Mode Only)
Press this code (*51) when you answer a fax call on an extension or external telephone.
Remote Deactivation Code (Fax/Tel Mode only)
When the machine answers a voice call, it pseudo/double-rings. You can pick up at an extension telephone by
pressing this code (# 5 1).
Remote Retrieval Access
The ability to access your machine remotely from a touch tone telephone.
Remote Setup
The Remote Setup program lets you configure many machine and network settings from a computer application.
When you start this application, the settings on your machine will be downloaded automatically to your computer
and displayed on your computer screen. If you change the settings, you can upload them directly to the machine.
Resolution
The number of vertical and horizontal lines per inch.
Ring Delay
The number of rings before the machine answers in Fax Only and Fax/Tel modes.
Ring Volume
Volume setting for the machine’s ring.
Scanning
The process of sending an electronic image of a paper document into your computer.
Search
An alphabetical electronic listing of stored Address Book and Group numbers.
Settings Tables
At-a-glance instructions that show all the settings and options that are available for setting up your machine.
Home > Glossary
571
To Next Page
Loading...
Need help?
General
Weight and Dimensions
