Home > Fax > Receive a Fax > Fax Polling > Polling Receive > Setup for Delayed Polling Receive
Setup for Delayed Polling Receive
Related Models: MFC-J985DW
Delayed Polling Receive lets you set your machine to begin polling receive at a later time. You can set up only
one delayed polling operation.
1. Press [Fax].
(MFC-J985DW)
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
2. Press [Options] > [Polling RX].
3. Press [Timer].
4. Enter the time you want to start polling. Press [OK].
5. Enter the fax number you are polling using the Address Book or keyboard.
6. Press [Fax Start]. The machine makes the polling call at the time you entered.
Related Information
• Polling Receive
252
To Next Page
Loading...
