Brother MFC-J985DW

Home > Security > Lock the Machine Settings > About Using Memory Security > Turn Memory Security
On/Off
Turn Memory Security On/Off
Related Models: MFC-J985DW
1. Press [Settings] > [All Settings] > [Fax] > [Miscellaneous] > [Memory Security] >
[Set Security].
2. Enter the registered four-digit password using the keyboard on the Touchscreen. Press [OK].
The machine goes offline and the Touchscreen displays [Memory Security].
Turning off Memory Security:
a. Press [Unlock].
b. Enter the current four-digit password, and then press [OK].
If you enter the wrong password, the Touchscreen displays [Wrong Password] and stays offline. The
machine will stay in Secure Mode until the correct password is entered.
Related Information
• About Using Memory Security
377