Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the
Date & Time
Set the Date & Time
(MFC models)
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to
each fax you send by setting your Station ID.
(DCP models)
If the machine's power has been off, the machine's date and time may not be current. Re-enter them.
1. Press
[Settings].
2. Press
[Date & Time].
3. Press [Date].
4. Enter the last two digits of the year on the Touchscreen, and then press [OK].
5. Enter two digits for the month on the Touchscreen, and then press [OK].
6. Enter two digits for the day on the Touchscreen, and then press [OK].
7. Press [Time].
8. Enter the time (in 24-hour format) using the Touchscreen.
Press [OK].
9. Press
.
Related Information
• General Settings
• Set Your Station ID
501
To Next Page
Loading...
