Translation of the Original Operating Instructions
VP-80/VP-80 E
51
.
Accep-
tance Test
\Internal Disk\Conf-
Check\Saved
\Storage Card\Conf-
Check\Saved
Results are stored
as *.CCR. Optional –
depending on the
*.CCS test template
– the results are also
stored as *.csv.
\Internal Disk\Analy-
ser\ConfCheck
Optional – depen-
ding on the *.CCS
test template – spec-
tra are stored here
and can be viewed
directly in the FFT
Analysis module.
\Internal Disk\Conf-
Check\<Template
directory>
*.CCS test templates
are read but never
written from here.
(There are standard
templates and user
templates.)
Sensor
Setup
\Internal Disk\System
Predefined sensors
are stored in the
Sensor Override-
List.cfg file
Module
Directory path and
directory name on
VP-80
Explanation and
file format
Note!
In the Time Signal and Tracking modules it is possible to
explicitly select the storage location (Internal Disk or Storage
Card) in the setup before a measurement, ignoring the setting
in the system setup. Since the *.wav files can take up a lot of
storage space (up to 2GB maximum per *.wav file), the option
of being able to explicitly select the storage location is useful.
To Next Page
Loading...
