Translation of the Original Operating Instructions
VP-80/VP-80 E
53
Loosen the four screws of the battery cover by 90°.
Open the rear battery cover.
Open the Velcro straps.
Remove the battery pack from the compartment. The bat-
tery can remain connected to the device.
Press the reset key using a pointed object.
The VIBROPORT 80 restarts.
Put the battery back in the battery compartment.
Secure the battery with the Velcro straps.
Put the cover back on the battery compartment and lock
the compartment with the four screws.
To Next Page
Loading...
