Translation of the Original Operating Instructions
VP-80/VP-80 E
67
HELP
The online help is called up with this softkey. Here you can
obtain information on:
• Program Manager
• Information on the operator interface, basic operation
(cursor keys, fire keys) and a brief description of the
various modules are displayed here.
• The INFO softkey is also briefly described (Instrument
Unit ID, Firmware Version Number, list of installed
modules, free memory in percent and total memory in
MB).
• System Setup
• Here a brief description is given of all System Setup
parameters. The System Setup is described in detail in
a separate chapter.
• Using Instrument
• This menu item describes the display, the basic opera-
tion and the relevant operating controls (alphanumeric
keypad, cursor keys, fire keys, 0 key, On/Off switch,
warm start, charge state, date/time, and text input).
• Shortcut Keys
• The most important key combinations are described
here.
• Save screenshot as bitmap (0 and P).
• Display charge state (point key).
• Change the cursor mode (Single, Harmonic, Single +
Harmonic) during FFT measurements (4).
• Warm start (2789 simultaneously).
• Mute individual channels for the earphones (6).
• Adjust the volume of a channel for the earphones (0+ up
cursor key / 0+ down cursor key).
To Next Page
Loading...
