1-2 Safety
Figure 1-1: EMO Box
White Power On Button and Black Power Off Button
The DektakXT system is equipped with a white POWER ON button and a black POWER OFF button.
These buttons are located next to the red
EMERGENCY OFF button on the EMO Box (see
Figure 1-1).
Pressing the
POWER ON button provides DC power to all system devices but the computer, monitor,
and power supply adapter.
Pressing the
POWER OFF button shuts off DC power to all system devices but the computer, monitor,
and power supply adapter. The 24 VDC control circuit in the EMO Box also remains energized.
SAFETY PRECAUTIONS
The DektakXT system is designed to minimize potential health and safety hazards during normal
operation and routine maintenance activities. As with any mechanical system that uses electrical
energy and compressed air, it contains some physical and electrical hazards. You should be aware of
these potential hazards and the controls used to minimize them. Review this section and contact
Bruker if you have any questions on environmental, health, or safety-related issues associated with
the system.
Potential safety hazards associated with the system are clearly identified in this manual. In addition,
warning and safety labels have been placed on the system where there exists a potential for personal
Power Off button
Power On button
Emergency Machine
Off (EMO) button
CAUTION
Use the EMERGENCY OFF button only in case of an emergency.
To Next Page
Loading...
Need help?
General
