Taking Measurements and Analyzing Data 4-13
13 At any time, you can click to cancel the automated sequence.
14 At the end of an automation run, a message informs you that the system has “Completed script named
[Script Name].” Click OK.
APPENDING ANALYTICAL FUNCTIONS
After you take a scan measurement, Vision64 can calculate a number of analytical functions for
analysis of roughness, waviness, step height, and geometrical measurements. Frequently calculated
functions include ASH (delta average step height), horizontal distance, and vertical distance. You can
save your selection of analytical functions to a Vision recipe so that they are automatically calculated
whenever you take a manual measurement or an automated series of measurements.
To select analytical functions:
1 On the Ribbon, click the Data Analysis icon .
2 With the live measurement results open, right-click on the Analytical Results pane in the Data Analysis
window. The following pop-up menu appears.
Figure 4-16: Analytical Results Pop-Up Menu
3 Select Append. The following window appears.
To Next Page
Loading...
Need help?
General
