T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 38 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Warning Codes without registration
1. Check S133, which is located under the arm panel.
2. To view the registers with recorded warning codes, see the
section “Display and programming”:
The number of the address register is displayed on the left side, while
the value is displayed on the right side.
1. Proceed as follows when you wish to look in the register for
warning codes when registering, see the section “Display and
programming”.
The number of the address register is displayed on the left side, while
the value is displayed on the right side.
Code 25
Description Output stage error
Error mode General error
Error cause 1. Emergency switch S133 for Y12
(retracted mast) activated
2. See codes 50-62 for more information
Comments
Code 26
Description Input stage error
Error mode General error
Error cause 1. See codes 90-94 for more information
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...