SMART KTF 2000 – KTF/RW Operation
SMART KTF 2000 3B-35 -
2.2) RAMP UP= P2.2
Press
to enable the parameter programming
This parameter allows you to control the speed with which the system will change
from a given working tension to a higher tension, in such a way as to avoid
undesired yarn breakages.
[allowed values 1 ÷ 100]
For more details and application examples, please refer to KTF/RW
Operating Manual.
Choose the desired value using:
After having set the desired value, press
to continue.
2.3) RAMP DOWN= P2.3
Press
to enable the parameter programming
This parameter allows you to control the speed with which the system will change
from a given working tension to a lower tension, in such a way as to avoid
undesired yarn breakages.
[allowed values 1 ÷ 100]
For more details and application examples, please refer to KTF/RW
Operating Manual.
Choose the desired value using:
After having set the desired value, press
to continue
To Next Page
Loading...
